At 9mm OD, along with next gen fine tuned super soft internal springs, these are the most scale and precision made suspension shocks available on the market.
Specifications:
CNC Machined Billet Aluminum, Heat Treated
Ball Width: 0.25in 6.45mm
Ball Lip OD: 0.19in 4.8mm
Ball Inner OD: 0.12in 3.1mm
Hole to Hole (Compressed): 2.68in 68mm
Hole to Hole (Uncompressed): 3.66in 90mm
Overall Length: 3.94in 100mm
Travel Length: 0.94in 24mm
Shock Body OD: 0.35in 8.8mm
Shaft OD: 0.12in 3mm
Each Weight: 0.40oz 11g
Notes:
These shocks do not use oil. Use a small amount to keep the shaft lubricated only.
These shocks have very small threads on the shock cap. You can easily install the cap wrong and cause the threads to strip. Please pay careful attention when removing and installing the shock cap.
Fits Gmade Sawback
Fits RC4WD Timberwolf Scale Crawler Kit (Bolted Chrome) (Z-K0016 'Disc') (Front Rear)
Fits Trail Finder 2 Truck Kit wMojave Body Set (Z-K0042 'Disc') (Rear)
Fits RC4WD Trail Finder 2 Truck Kit wMojave II Body Set (Z-K0049)
Fits Traxxas TRX-4, but will require both 2mm (Z-S0600) and 3mm (Z-S0806)
When installing on Axial SCX10-3 please use a 5mm spacer (Z-S0821) on the shock tower.
Specifications:
CNC Machined Billet Aluminum, Heat Treated
Ball Width: 0.25in 6.45mm
Ball Lip OD: 0.19in 4.8mm
Ball Inner OD: 0.12in 3.1mm
Hole to Hole (Compressed): 2.68in 68mm
Hole to Hole (Uncompressed): 3.66in 90mm
Overall Length: 3.94in 100mm
Travel Length: 0.94in 24mm
Shock Body OD: 0.35in 8.8mm
Shaft OD: 0.12in 3mm
Each Weight: 0.40oz 11g
Notes:
These shocks do not use oil. Use a small amount to keep the shaft lubricated only.
These shocks have very small threads on the shock cap. You can easily install the cap wrong and cause the threads to strip. Please pay careful attention when removing and installing the shock cap.
Fits Gmade Sawback
Fits RC4WD Timberwolf Scale Crawler Kit (Bolted Chrome) (Z-K0016 'Disc') (Front Rear)
Fits Trail Finder 2 Truck Kit wMojave Body Set (Z-K0042 'Disc') (Rear)
Fits RC4WD Trail Finder 2 Truck Kit wMojave II Body Set (Z-K0049)
Fits Traxxas TRX-4, but will require both 2mm (Z-S0600) and 3mm (Z-S0806)
When installing on Axial SCX10-3 please use a 5mm spacer (Z-S0821) on the shock tower.